Epson 1000 ICS Mode D'Emploi

Maintenance

8. Press down firmly on the ink cartridge clamp until it snaps in place.

If you need to replace the other ink cartridge, repeat steps 4 through 8 before 
continuing with step 9.

9. Carefully lower the scanner and press it down until it clicks into place. Press the 

x

Copy

 button. The EPSON 1000 ICS begins charging the ink delivery system.

The P

Operate

 light flashes and the EPSON 1000 ICS makes noise. Charging 

takes about half a minute. When it’s finished, the P

Operate

 light stops flashing 

and stays on, and the 

Error

 light goes out. 

Never turn off the EPSON 1000 ICS while the 

P

Operate light is flashing, 

unless the EPSON 1000 ICS hasn’t moved or made noise for more than 
5 minutes. 

To keep your EPSON 1000 ICS operating at its best, you should clean it periodically.

1. Turn off the EPSON 1000 ICS, unplug the power cord, and disconnect the USB 

cable.

2. Remove all paper, then use a soft brush to clean any dust or dirt from the sheet 

feeder.

3. Clean the exterior with a soft, damp cloth.