Epson CX11NF Manuel D’Utilisation
Setting Your AcuLaser CX11NF to Receive
Faxes
Faxes
By default your Epson AcuLaser
®
CX11NF is set to receive distinctive
ring pattern telephone calls. This may prevent the AcuLaser CX11NF
from receiving incoming faxes.
from receiving incoming faxes.
If your AcuLaser CX11NF does not pick up a telephone or fax call,
follow these steps to change the DRPD (Distinctive Ring Pattern
Detection) setting:
follow these steps to change the DRPD (Distinctive Ring Pattern
Detection) setting:
1. Press
the
Setup
button.
The Setup light turns on and the LCD screen displays Setup
Mode for a few seconds, and then changes to the Setup menu.
Mode for a few seconds, and then changes to the Setup menu.
2. Press the
d
button twice to select
Fax Settings
. Then press the
r
button.
3. Press the
d
button twice to select
Reception Settings
. Then
press the
r
button.
4. Press the
d
button three times to select
DRPD
. Then press the
r
button.
5. Press the
u
button to select
ALL
. Then press the
r
button.
DRPD is set to
ALL
.
6. Press t
he
Setup
button to exit the menu.
Your telephone company can add a second telephone number to your
main telephone line that will ring with a distinctive pattern. DRPD
allows the AcuLaser CX11NF to distinguish between different ring
patterns. When DRPD is set to
main telephone line that will ring with a distinctive pattern. DRPD
allows the AcuLaser CX11NF to distinguish between different ring
patterns. When DRPD is set to
NORMAL
, the AcuLaser CX11NF
will only answer the distinctive ring and ignore the one regular ring.
© 2005 Epson America, Inc. 7/05
CPD-20347
Printed in USA
Setting Your AcuLaser CX11NF to Receive
Faxes
Faxes
By default your Epson AcuLaser
®
CX11NF is set to receive distinctive
ring pattern telephone calls. This may prevent the AcuLaser CX11NF
from receiving incoming faxes.
from receiving incoming faxes.
If your AcuLaser CX11NF does not pick up a telephone or fax call,
follow these steps to change the DRPD (Distinctive Ring Pattern
Detection) setting:
follow these steps to change the DRPD (Distinctive Ring Pattern
Detection) setting:
1. Press
the
Setup
button.
The Setup light turns on and the LCD screen displays Setup
Mode for a few seconds, and then changes to the Setup menu.
Mode for a few seconds, and then changes to the Setup menu.
2. Press the
d
button twice to select
Fax Settings
. Then press the
r
button.
3. Press the
d
button twice to select
Reception Settings
. Then
press the
r
button.
4. Press the
d
button three times to select
DRPD
. Then press the
r
button.
5. Press the
u
button to select
ALL
. Then press the
r
button.
DRPD is set to
ALL
.
6. Press t
he
Setup
button to exit the menu.
Your telephone company can add a second telephone number to your
main telephone line that will ring with a distinctive pattern. DRPD
allows the AcuLaser CX11NF to distinguish between different ring
patterns. When DRPD is set to
main telephone line that will ring with a distinctive pattern. DRPD
allows the AcuLaser CX11NF to distinguish between different ring
patterns. When DRPD is set to
NORMAL
, the AcuLaser CX11NF
will only answer the distinctive ring and ignore the one regular ring.
© 2005 Epson America, Inc. 7/05
CPD-20347
Printed in USA