Epson CX11N Manuel Complémentaire

®

If you need to ship the Aculaser CX11N/CX11NF, follow these steps to package it to 
prevent damage during transit:

1. Make sure the CX11N/CX11NF is turned on, then press the 

Setup

 button

The Setup light turns on and the LCD screen displays Setup Mode for a few 
seconds, then changes to the Setup menu screen.

2. Use the u or d button to select 

Scan Settings

, then press the r button.

3. Use the u or d button to select 

Carriage Lock

, then press the r button.

4. Set the transportation lock on the left side of the document table to the 

locked 

position. 

5. Slowly flip back the scanner until it 

stops.

6. Close the output tray extension, then 

lift up cover B. 

7. Pull up the orange lever inside 

cover B.

8. Lift out the photoconductor using its 

handle.

9. Package the photoconductor in a 

separate box or bag large enough to 
hold it.

Note: 
Do not remove the toner cartridges. 

10. Flip down the orange lever, then close cover B.

11. Slowly push down the scanner to its original position. 

Cover B