Epson 835 Notice D’Utilisation Abrégée
38
Maintaining Your Product
4. Remove the cartridge from the package. Do not touch the green chip
on the side.
5. Remove the yellow tape from the bottom of the cartridge.
Caution:
Do not remove any other labels or seals, or ink will leak.
Do not remove any other labels or seals, or ink will leak.
6. Insert the new cartridge into the holder and push it down until it clicks into
place.
7. Close the scanner.
Note:
If you see a warning message that the cartridge you just replaced is not installed,
open the scanner and press down the cartridge securely.
If you see a warning message that the cartridge you just replaced is not installed,
open the scanner and press down the cartridge securely.