Epson CX4100 Mode D'Emploi

4.

Insert the paper, printable side up, against the 
right side of the sheet feeder. Always load it short 
edge first, even for landscape printing. 

Place the stack of paper behind the tabs and make 
sure it fits under the c arrow mark inside the left 
edge guide.

5.

Slide the edge guide against the left edge of the 
paper, but not too tightly.

6.

Flip the feeder guard back.

Also make sure the paper thickness lever is set 
down to the m position.

The printable 
side is often 
whiter or 
brighter than 
the other side.

10

× 15 cm (4 × 6 in.) 

and 13

× 18 cm 

(5

× 7 in.)

The letter L appears 
briefly in the Copy 
window on the 
control panel when 
you move the lever 
to the m position; the 
letter H appears 
when you move it to 
the ^ position.