Epson 1400 Guide D’Exploitation
Front panel
lights
The two lights on the front panel allow you to monitor the
status of the printer. The green Ready light is on when the
printer is on and is ready to receive print data. As data is
received from the computer, the Ready light flashes.
received from the computer, the Ready light flashes.
The orange Error light indicates an error condition. If the Error
light is on continuously, it indicates that no paper is loaded or
that there is a paper feed jam. A flashing Error light indicates
one of the following: an internal paper jam has occurred, the
front cover is open, or the toner cartridge is not installed.
Other status conditions are indicated by the combination of the
Ready and Error lights. The following table describes all status
conditions that can be indicated by the printer’s lights:
Ready
Off
Slow Flashing
Flashing
On
Off
Off
Off
Flashing
On
Error
off
off
off
off
On
Flashing
Flashing
Flashing
On
On
Printer status
Printer is off.
Printer is in power save mode.
Print data is being received at the printer or
has already been received.
Printer is ready to receive print data.
Either the paper tray is empty or there is a
Printer is ready to receive print data.
Either the paper tray is empty or there is a
paper feed problem.
One of the following errors has occurred:
One of the following errors has occurred:
• Paper has jammed inside the printer.
• The front cover is open.
• The toner cartridge is not installed.
One of the following errors has occurred:
• Insufficient memory to print job.
• Printer is in manual feed mode and is
waiting for the next sheet.
• There is a printer overrun error.
The printer is warning up.
The printer is warning up.
A printer engine or controller error has
occurred. Contact your dealer or a
qualified service person.
1-10
Using Your Printer