Epson 3000 Manuel D’Utilisation
Testing the Printer
Running the self test
The self test runs in draft mode or Letter Quality (LQ) mode,
depending upon which button you hold down as you turn on the
printer.
1. Make sure the printer is turned off and paper is loaded.
2. While holding down the
LINE FEED
button (draft mode) or the
FORM FEED
button (LQ mode), turn on the printer. After
printing starts, release the button.
CAUTION:
After turning the printer off, always wait at
least five seconds before turning it back on. Turning the
power on and off rapidly can damage the printer.
3. The self test continues until the paper runs out or you press the
ON LINE
button. When you wish to. stop the test, press the
ON
LINE
button.
Note: To resume the test, press the
ON LINE
button again.
Setting Up the Printer
1-17