Epson 3000 Manuel D’Utilisation

Setting the top of form position
You may need to set the top of the form to a certain position for

printing 

on 

ready-made forms.

To set the top-of-form position at the third line of the paper, for

example, mark the paper 

4.1 

inches 

(105 mm) 

above the

perforation. Then load the paper and align this mark with the mark

on the tractor unit, as shown below. The third line (0.42 inches or

mm) below the perforation becomes the top-of-form position.

You may have to experiment with setting the top of form position

several times to get this adjustment just right.

Paper Handling

2-11