Epson 3000 Manuel D’Utilisation

Printing 

Except for 

paper-thickness setting, you load multi-part paper the

same way as continuous paper. For details, see the section on

loading continuous paper in this chapter. Pay special attention to

setting 

top-of-form position.

l

Do not use multi-part forms with the single-sheet

feeding system.

l

When printing multi-part forms, make sure the

printing stays entirely within the printable area of the

forms.

When printing labels, always choose the type mounted on a

continuous backing sheet with sprocket holes for use with a tractor.

Do not try to print labels as single-sheets because labels on a shiny

backing sheet almost always slip a little.

Load labels from 

bottom paper slot only. You load labels the

same way that you load continuous paper except 

the paper-

thickness lever must be adjusted for printing labels. See the section

on loading continuous paper in this chapter for details. For the

correct paper-thickness setting, see the table on page 

l

Never feed labels backward through the printer.

Labels can easily peel off the backing and jam the

printer.

l

Since labels are especially sensitive to temperature and

humidity, use them only under normal operating

conditions.

l

Do not leave labels loaded in the printer between jobs;

they curl around the platen and may jam when you

resume printing.