Epson 3000 Manuel D’Utilisation

Setting the DIP Switches

This section describes the different features you can control with the

printer’s DIP switches.

When DIP switch 1-8 is off (cut-sheet feeder mode is off), DIP

switches 2-1 and 2-2 let you select a page length of 8.5 inches (216

mm), 11 inches (279 mm), 

inches (296 mm), or 12 inches (305

mm).

When DIP switch 1-8 is on (cut-sheet feeder mode is on), you can

select the CSF (Cut-Sheet Feeder) page length of A4- or Letter-size

paper by setting DIP switches 2-1 and 2-2.

Auto line feed
When auto line feed is on (DIP switch 2-3 on), each carriage return

code (CR) is automatically accompanied by a line feed code (LF). If

your printer is double spacing, turn the DIP switch off. If each line

overprints the next, turn the DIP switch on.

The input buffer stores data from your computer. If you want to

free your computer for other tasks while the printer prints, change

the setting to 8 Kbytes (DIP switch 2-4 on). Before defining user-

defined characters, however, be sure to return the setting to 1 Kbyte

(DIP switch 2-4 off).