Epson DLQ-3500 Guide D’Installation Rapide

3. Tear off all printed pages using the 

tear-off edge of the printer cover.

* tear-off edge

When you resume printing, the printer 
feeds the paper back to the top-of-form 
position and begins printing. (You can 
also manually feed the paper back to the 
top-of-form position by pressing the 
Tear Off/Special Paper button.)

To automatically advance your printed 
documents to the tear-off position, turn on 
the auto tear-off mode and select the 
appropriate page length for continuous 
paper in the default-setting mode. See 
“Changing default settings”  for instructions 
on how to change the default settings.

The steps below describe how to use auto 
tear-off.

1. When printing is finished, the printer 

advances the perforation of the final 
printed page to the tear-off position.

2. Tear off all printed pages using the 

tear-off edge of the printer cover.

3. When you resume printing, the printer 

feeds the paper back to the top-of-form 
position and begins printing. (You can 
also manually feed the paper back to the 
top-of-form position by pressing the 
Tear Off/Special Paper button.)

Follow these steps to remove continuous 
paper from the printer:

1. Press the Tear Off/Special Paper 

button after the printer finishes printing 
your document. The printer advances 
the paper to the tear-off position.

Note:
When the auto tear-off function is on, the 
printer advances the paper perforation to the 
tear-off position automatically. You can turn 
on the auto tear-off function by changing the 
default settings. See “Changing default 
settings”  for instructions.

2. Tear off the printed pages.

3 . Press the Load/Eject button to feed the 

continuous paper backward out of the 
printer and into the standby position.

4. To completely remove continuous paper 

from the printer, open the sprocket 
covers. Remove the paper from the 
tractor unit, and then close the sprocket 
covers.