Epson DLQ-3500 Guide D’Installation Rapide

Always tear off and eject labels as described 
below.

 

c

Caution:
Never feed labels backward using the 
Load/Eject button, Tear Off/Special 
Paper button, or knob on the right side 
of the printer. Labels can easily peel off 
their backing and jam the printer.

1. At the back of your printer, tear off the 

last label form that has entered the 
printer, but do not press the Tear 
Off/Special Paper button. See the 
illustration below.

2. Press the LF/FF button to eject the last 

label form forward.

 

c

The continuous forms with labels is a type of 
continuous paper with one label on each 
page. This is different from label paper, 
which consists entirely of labels. When 
printing on this type of paper, the printer 
must adjust the height of the print head for 
the extra thickness of the labels.

Follow these steps to load continuous forms 
with labels:

 

c

1. Make sure of the following:

❏ Your software settings keep the 

printing entirely within the 
printable area. See “Printable area” 
in the Reference Guide for more 
information.

❏ Tractor is selected as the paper 

source on the control panel.

2. Turn on Overlapping Forms and Skip 

over perforation settings in the 
default-setting mode.

Note:
When Overlapping Forms is turned on in 
the default-setting mode, the printer 
automatically activates the auto paper 
thickness function even though the 
paper-thickness lever may be set to another 
position.