Epson LQ-570e Manuel D’Utilisation

5-10

Changing Printer Settings From the Printer’s Control Panel

R4C4620
Rev. C

A5 size

CHANGE.FM

3/29/00

Pass 3

Proof Sign-off:
SEI

Y.Ohkawara T.Takahashi
T.Takahashi

SEI

M.Kauppi K.Blair

Changing default settings

Follow the steps on the next page to enter the default-setting mode
and change the printer’s default settings.

Note:
❏ To print the language selection and default-setting mode

instructions, you need five sheets of A4 or letter size single-sheet
paper, or five pages of continuous paper that is at least 279 mm (11
inches) long and 210 mm (8.27 inches) wide. See Chapter 2 for
instructions on loading continuous paper, or Chapter 3 for
instructions on loading single sheets.

❏ If you use single sheets, you need to load a new sheet of paper each

time the printer ejects a printed sheet.

1. Make sure paper is loaded and the printer is turned off.

Caution:
Whenever you turn off the printer, wait at least five seconds
before turning it back on; otherwise you may damage the
printer.

2. While holding down the Font button, turn on the printer. The

printer enters the default-setting mode and prints the
language selection instructions.

3. Press the Font button until the Font lights indicate the

language you want, as described in the language selection
instructions.