Epson LQ-570e Manuel D’Utilisation

L

A5 size

INTRO.FM

3/29/00

Pass 3

Proof Sign-off:
SEI

Y.Ohkawara T.Takahashi
T.Takahashi

SEI

M.Kauppi K.Blair

Your printer provides a variety of paper paths for printing on 
continuous and single-sheet paper. As described below, paper can 
be fed into the printer from the top, front, bottom, or rear. You can 
select the paper path that best suits your current printing needs.

You can choose from two tractor positions (push and pull) and 
three paper entry slots (front, rear, and bottom) for continuous 
paper printing. This section helps you determine which paper 
paths and tractor positions are best for your continuous paper 
printing needs. See the appropriate sections in Chapter 2 for 
tractor installation and paper loading instructions.

If you often need to tear off sheets of continuous paper (for 
example, if you are printing purchase orders or sales slips), it is 
best to use the push tractor. This allows you to use the printer’s 
tear-off edge to easily tear off printed sheets of continuous paper 
at the perforation. Also, when continuous paper is loaded on the 
push tractor, you can load single sheets of paper from the paper 
guide without removing the continuous paper from the tractor.

The tractor is installed in the rear push position when the printer 
is shipped. See the table below for details about the corresponding 
paper-feeding path.

push

Caution:
Do not load continuous paper with labels in the rear 
slot; the labels may come off their backing sheet 
inside the printer and cause a paper jam.