Epson LQ-570e Manuel D’Utilisation
7
Troubleshooting
7-9
R4C4620
Rev. C
Rev. C
A5 size
TRBLE.FM
3/29/00
Pass 3
R
Proof Sign-off:
SEI
SEI
Y.Ohkawara T.Takahashi
T.Takahashi
T.Takahashi
SEI
M.Kauppi K.Blair
Wrong top-of-form position
Printing starts too high or low on the page.
Cause
What to do
The paper size setting in your
application software or
printer driver does not match
the size of the paper you are
using.
application software or
printer driver does not match
the size of the paper you are
using.
Check the paper size setting in your
application or printer driver.
application or printer driver.
The printer’s page length
settings for the tractor do not
match the size of the
continuous paper you are
using.
settings for the tractor do not
match the size of the
continuous paper you are
using.
Check the page length settings for the
tractor using the printer’s default-
setting mode or the EPSON Remote!
utility. See “About Your Printer’s
Default Settings” on page 5-4 or “Using
the EPSON Remote! Utility” on page
4-30.
tractor using the printer’s default-
setting mode or the EPSON Remote!
utility. See “About Your Printer’s
Default Settings” on page 5-4 or “Using
the EPSON Remote! Utility” on page
4-30.
The top margin or top-of-
form position setting is
incorrect.
form position setting is
incorrect.
Check the margin or top-of-form
position setting in your application
software. See the printable area
specifications in Appendix C.
position setting in your application
software. See the printable area
specifications in Appendix C.
Adjust the top-of-form position in
micro adjust mode. Be aware, however,
that settings made in Windows
applications override settings made in
micro adjust mode. See “Adjusting the
Top-of-Form Position” on page 2-31.
micro adjust mode. Be aware, however,
that settings made in Windows
applications override settings made in
micro adjust mode. See “Adjusting the
Top-of-Form Position” on page 2-31.
The printer you want to use is
not selected in your software.
not selected in your software.
Choose the correct printer from the
Windows desktop or in your
application before printing.
Windows desktop or in your
application before printing.
You moved the paper using
the knob while the printer
was on.
the knob while the printer
was on.
Adjust the top-of-form position using
the micro adjust feature. See
“Adjusting the Top-of-Form Position”
on page 2-31.
the micro adjust feature. See
“Adjusting the Top-of-Form Position”
on page 2-31.
c
Caution:
Never use the knob to adjust the top-of-form position; this may damage the
printer or cause it to lose the top-of-form position.
Never use the knob to adjust the top-of-form position; this may damage the
printer or cause it to lose the top-of-form position.