Epson 777 Manuel D’Utilisation

Make sure that neither the Copies 
setting in your printer software, nor the 
Copies setting in your application is set 
for multiple copies.

■

If the paper doesn’t eject fully, you 
may have set the wrong paper size. 
Press the 

 

b maintenance button to 

eject the paper. Then select the 
correct paper size in your application 
or printer software.

■

If it’s wrinkled when it ejects, the 
paper may be damp or too thin.

■

If paper doesn’t feed, remove it from 
the sheet feeder. Then reload it 
against the right edge and slide the 
left edge guide against the other side.

■

If paper jams, turn off your printer, 
open the cover, and remove any 
paper that’s inside, including any 
small pieces that may have torn off. 
Carefully reload paper and press the 

 

b maintenance button.

■

If multiple pages feed at once, 
remove the sheet feeder and fan the 
edges of the stack to separate the 
sheets. Then carefully reload it.

If your paper loads incorrectly or jams 
frequently:

■

Use new, smooth, high-quality paper, 
loaded printable side up.

■

Don’t load paper above the arrow 
mark on the left edge guide.

■

Place the paper against the right edge 
and slide the left edge guide against 
it, but not too tightly.