Epson ELP-3000 Manuel D’Utilisation

Before beginning, turn off the projector and Macintosh if they are on. To access the

connectors on the projector, push open the cover located on the right side of the
projector, under the handle.

1. Attach the Macintosh adapters provided with the projector to the appropriate

connectors 

on the Y-cable. Connect the MONITOR adapter to the MONITOR

connector (la), and connect the VGA adapter to the VGA connector (1b).

2. Disconnect the monitor cable from the monitor port on the back of the

Macintosh and 

it to the MONITOR Macintosh adapter.

3. Connect the VGA adapter (attached to the Y-cable) to the Macintosh’s monitor

port.

4. Connect the Y-cable’s LCD connector 

to 

the projector’s Computer IN/OUT port.

Tighten the screws for all connectors to make sure they are fastened securely.

Connecting to a Computer

9