Epson 503c Produit Fiche De Donnée
EPSON PowerLite 503c/713c Projector
6
-
EPSON PowerLite 503c/713c Projector
9/01
Projector Status Lights
The lights on top of the projector indicate the projector’s
status and let you know when a problem occurs.
status and let you know when a problem occurs.
Using the Remote Control
The remote control lets you access all of your projector’s
features from anywhere in the room (up to 30 feet away). You
can use it to turn the projector on and off, zoom the image,
and highlight your presentation, for example.
features from anywhere in the room (up to 30 feet away). You
can use it to turn the projector on and off, zoom the image,
and highlight your presentation, for example.
Open the cover just below the
Esc
button to access these
remote control functions:
Light
Status
Description and action
orange
The projector is in sleep mode. You can
unplug it to turn it off or press the Power
button to turn it on.
unplug it to turn it off or press the Power
button to turn it on.
flashing
green
green
The projector is warming up. Wait for the
image to appear.
image to appear.
green
The projector is operating normally.
flashing
orange
orange
The projector is cooling down. You can’t
turn the projector on (and should not
unplug it) until the light stops flashing and
remains orange.
turn the projector on (and should not
unplug it) until the light stops flashing and
remains orange.
red
Power is cut off because of an internal
problem. Remove the power cord and
contact EPSON for help.
problem. Remove the power cord and
contact EPSON for help.
flashing
orange
orange
The lamp is almost burned out. This is a
good time to replace it, following the
instructions on page 8.
good time to replace it, following the
instructions on page 8.
red
The lamp is burned out. Replace it as
described on page 8.
described on page 8.
flashing
red
red
There is a problem with the lamp, power
supply, fuse, or circuit. If necessary, replace
the lamp as described on page 8.
supply, fuse, or circuit. If necessary, replace
the lamp as described on page 8.
flashing
orange
orange
The projector is too hot. Make sure the
temperature surrounding the projector does
not exceed 104
temperature surrounding the projector does
not exceed 104
°
F and there is plenty of
space around and under the projector for
ventilation. Clean the air filter if necessary.
See page 8 for instructions.
ventilation. Clean the air filter if necessary.
See page 8 for instructions.
red
The projector is overheating, which turns off
the lamp automatically. Let it cool for a few
minutes, then turn it back on. Make sure
there is plenty of space around and under
the projector for ventilation. If it continues
to overheat, you may need to change the air
filter. See page 8 for instructions.
the lamp automatically. Let it cool for a few
minutes, then turn it back on. Make sure
there is plenty of space around and under
the projector for ventilation. If it continues
to overheat, you may need to change the air
filter. See page 8 for instructions.
flashing
red
red
There is a problem with the cooling fan or
temperature sensor. Turn off the projector
and unplug it. Contact EPSON for help.
temperature sensor. Turn off the projector
and unplug it. Contact EPSON for help.
power light
lamp light
temperature
light
light
Power
Freeze
A/V Mute
E-Zoom
R/C ON
OFF
3
1
5
2
4
Enter
Esc
Enter
Esc
Freeze
A/V Mute
E-Zoom
highlighting
effects buttons
effects buttons
light
IR output
Power (projector)
remote control
on/off
on/off
1
5
Enter
Esc
Menu
Comp
S-Video
Auto
P in P
Resize
Video
EasyMP
Help
- Volume +
Menu
Comp
S-Video
Auto
Picture in Picture
Volume
Help
Video
Resize