Epson 61p Manuel D’Utilisation

You can connect the PowerLite projector to any computer that has a 
standard VGA or BNC monitor port, including PC notebook and 
laptop computers, Macintosh PowerBooks and iBooks, and hand-held 
devices. You can connect two computers at the same time. 

Follow the instructions in this section to:

■

Connect the projector to your computer with the VGA cable 
included with the projector.

■

Connect the projector to your computer with a 
commercially-available VGA–5BNC cable.

After connecting the projector to your computer, you may also 
want to:

■

Connect the USB cable that came with your projector so that you 
can use the remote control as a wireless mouse; see page 19

■

Connect a monitor to the projector so you can view your 
presentation close-up as well as on-screen (not necessary if you’re 
using a laptop); see page 20

■

Connect a commercially-available computer audio cable to play 
computer audio; see page 21

Follow these instructions to connect to your computer with the VGA 
cable that came with your projector. Before you start, make sure your 
computer and the projector are turned off.

1. If you are connecting the projector to a desktop computer, 

disconnect the monitor cable from your computer.

2. Locate the VGA computer cable that 

came with the projector.

If you have an iBook with an 
RCA video-out port, follow 
the instructions for 
connecting to a video device 
on page 23.

VGA computer cable