Epson 61p Manuel D’Utilisation

If your video source has component video connectors, you can use 
them to project a higher quality video image. You’ll need a 
component video cable (ELPKC19), which can be purchased from 
Epson. See page 12 for ordering information.

Before starting, make sure the projector and your DVD player or 
other video device are turned off.

1. Connect the large end of the component video cable to the 

projector’s 

Computer1/Component Video1

 or the 

Computer2/Component Video2

 port. 

2. Insert the three ends of the component video cable into the 

R

, 

G

, and 

B

 ports on your video source.

3. To play sound through the projector, follow the instructions 

If you don’t need to make any other connections, you can plug in 
your projector and turn it on. See page 30 for instructions.

If more than one device is connected to your projector, select 

Computer 1 (Component Video) 

or 

Computer 2 (Component 

Video)

 as the source, depending on which port you used. See page 32 

for details.