Epson 745c Manuel D’Utilisation
50
Presenting Through a Wireless Network
Starting EasyMP
Before connecting to the projector, you have to switch it to EasyMP
mode. Follow these steps:
mode. Follow these steps:
1. Turn on the remote control, as described on page 30. Point it at
the projector and press the P
Power
button.
2. Press the
EasyMP
button on the remote control to select EasyMP
as the source.
3. Insert the Epson 802.11G/B card in the card slot with the label
facing upward.
note
Only the Epson 802.11G/B
card is guaranteed to work.
Other brands may not be
compatible.
card is guaranteed to work.
Other brands may not be
compatible.
caution
Be careful to insert the card
correctly and never force the
card in; doing so may
damage it. The black end of
the card protrudes from the
slot when the card is fully
inserted.
correctly and never force the
card in; doing so may
damage it. The black end of
the card protrudes from the
slot when the card is fully
inserted.
Canada User's Guide.book Page 50 Friday, September 3, 2004 3:49 PM