Epson 1080 Manuel De Montage
7
Using the Projector’s Color Adjustments
If you notice that the peak of the red color channel is low after calibrating the component and
HDMI inputs, or if you need to make any other color adjustments, you can fine-tune the
color using the RGB and RGBCMY screens in the projector’s menu system.
HDMI inputs, or if you need to make any other color adjustments, you can fine-tune the
color using the RGB and RGBCMY screens in the projector’s menu system.
Note: These adjustments should be made only by a trained technician with a reference meter such
as the Photo Research PR-650 SpectraColorimeter or Konica Minolta CS-200 Chroma Meter.
as the Photo Research PR-650 SpectraColorimeter or Konica Minolta CS-200 Chroma Meter.
■ RGB
Press the
Menu
button on the Epson remote control and access this screen by selecting
Image > Advanced > RGB
.
Adjust the offset and gain for each signal color. Use
Offset
to adjust the base and
Gain
to
adjust the peak.
■ RGBCMY
Press the
Menu
button on the Epson remote control and access this screen by selecting
Image > Advanced > RGBCMY
.
Adjust the hue and saturation for each color component (red, green, blue, cyan, magenta,
yellow).
yellow).
TM