Epson elpmbuni Guide De Montage

Page de 19
 
ELPMBUNI
 
 
 
 
Page - 4 -  
Installation Manual 
Warning Statements 
 
WARNING 
PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE 
USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN 
THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY 
UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS, AND IS NOT 
RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, SUITS, ACTIONS OR 
CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF 
OR IN ANY MANNER RELATING TO ANY SUCH USE, ATTACHMENTS OR 
MODIFICATIONS. 
 
 
WARNING: 
THE CEILING STRUCTURE MUST BE CAPABLE OF SUPPORTING A MAX 
WEIGHT OF 25 LBS., THE WEIGHT OF THE PROJECTOR. IF NOT, THE CEILING 
MUST BE REINFORCED. PROPER INSTALLATION PROCEDURE BY QUALIFIED 
PERSONNEL AS OUTLINED IN THE INSTALLATIONS INSTRUCTIONS MUST BE 
ADHERED TO. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL 
INJURY. 
 
 
WARNING: 
SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE 
INSTALLATION OF THIS PRODUCT. USE PROPER SAFETY GEAR AND TOOLS 
FOR THE INSTALLATION PROCEDURE TO PREVENT PERSONAL INJURY. 
 
 
WARNING: 
PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION 
INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD. THE 
INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL 
INJURY AND PROPERTY DAMAGE. KEEP THESE INSTALLATION 
INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE 
REFERENCE. 
 
Indicates that the power plug is to be 
disconnected from the power outlet. 
 
 
Contact Premier Mounts with any 
questions – (800) 368-9700. 
 
 
 
 
 
 
Safety precautions must be taken at all times. 
 
 
 
 
 
 
 
 
 
Warning and Caution statements. 
 
 
 
 
A secure structure must support the weight, or load, of the projector. When mounting to a ceiling that contains wooden 
studs, dead center of the wooden stud must be confirmed prior to installation.  
 
Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result in 
damage to the projector and/or damage to the mounting surface. 
 
Do not install near heater, fireplace, direct sunlight, air conditioning or any other source of direct heat energy. Failure to 
do so may result in damage to the projector and could increase the risk of fire. 
 
At least two qualified people should perform the installation procedure. Injury and/or damage can result from dropping or 
mishandling the projector. 
 
Recommended mounting surfaces: wooden studs, solid-flat concrete, and reinforced metal studs. If the mount is to be 
installed on any surface other than wooden studs, use suitable hardware (which is commercially available).