Lexmark X5470 Mode D'Emploi
8
Click Select.
9
Repeat step 4 to step 8 for every printer that you want to scan to your computer.
10
When finished, click Done.
Note: To remove a printer from the list, select the printer, and then click —.
Scanning to a computer over a network
1
Make sure:
•
The printer is connected to the network through a print server, and the printer, the print server, and the
computer receiving the scan are on.
computer receiving the scan are on.
•
The printer is configured to scan over a network (Direct IP Printing).
2
Load an original document facedown into the ADF or on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
clippings) into the ADF. Place these items on the scanner glass.
3
From the control panel, press Scan Mode.
4
Press
or
repeatedly until the computer to which you want to scan is highlighted.
5
If you set a PIN during network setup, enter it using the numeric keypad, and press
.
6
Press
or
repeatedly until the scan destination you want appears.
7
Press Start Color or Start Black.
Related topics:
•
Managing scan jobs
Canceling a scan job
To cancel a scan using the control panel:
1
Press
.
Scanning stops and the scanner bar returns to its home position.
2
Press
to turn off the printer.
To cancel a scan using the software:
1
From the Finder desktop, double-click the Lexmark X5400 Series folder.
2
Double-click the Lexmark X5400 Series Center icon.
3
From the Progress dialog, click Cancel.
Related topics:
•
Scanning
41