TallyGenicom 930 Mode D'Emploi

• If you’re using an extension cord or power strip with the

printer, make sure that the total of the amperes required by
all the equipment on the extension is less than the
extension’s rating. Generally, the total ratings of all equip-
ment plugged into any one power line should not exceed
15 amperes. Don’t exceed this unless you know that the
power line your equipment is plugged into has a rating
above 15 amperes.

• Do not poke anything into the ventilation slots on the sides

of the printer; you could get a shock or cause a fire.

• Aside from the routine maintenance described in this

handbook, don’t try to service the printer yourself;
opening the cover may expose you to shocks or other
hazards. Don’t make any adjustments other than those
outlined in the handbook — you might cause damage
requiring extensive repair work.

• If anything happens that indicates that your printer is not

working properly or has been damaged, unplug it immedi-
ately.  These are some of the things to look for:

— The power cord or plug is frayed or damaged.

— Liquid has been spilled into the housing, or the printer

has been exposed to water.

— The printer has been dropped or its cabinet has been

damaged.

— The printer doesn’t function normally when you’re

following the operating instructions.

Safety.p65

10/3/97, 9:30 AM

2