Lexmark X7675 Mode D'Emploi
M
AKE
SURE
THE
PRINTER
POWER
IS
ON
Make sure the printer is connected to a power source and is turned on.
M
AKE
SURE
THAT
THE
NETWORK
IS
OPERATING
PROPERLY
•
Try to access other computers on the network.
•
Make sure all switches, hubs, and other connecting devices are turned on.
M
AKE
SURE
THE
PRINTER
HAS
VALID
NETWORK
SETTINGS
Print a network setup page from the printer and check the following. Refer to the User's Guide for instructions on
how to print a network setup page.
how to print a network setup page.
•
Verify that the IP address is correct for your network.
•
Verify that the gateway is correct.
•
Verify that the network mask is the same as the network mask used for other computers and printers on your
network.
network.
Cannot print to the network printer
C
HECK
THE
E
THERNET
CABLE
•
Check the Ethernet cable and the Ethernet connectors at both ends for any obvious damage.
•
Firmly plug one end of the Ethernet cable into the printer. Firmly plug the other end of the Ethernet cable into
the network hub or wall connection.
the network hub or wall connection.
•
Try using a different cable. Damage to the cable may not be obvious.
M
AKE
SURE
THE
PRINTER
POWER
IS
ON
Make sure the printer is connected to a power source and is turned on.
M
AKE
SURE
THAT
THE
NETWORK
IS
OPERATING
PROPERLY
•
Try to access other computers on the network.
•
Make sure all switches, hubs, and other connecting devices are turned on.
U
NINSTALL
AND
REINSTALL
THE
SOFTWARE
Troubleshooting
161