Archos jukebox studio Manuel De Montage

Page de 96
  
- 11 - 
 
Battery 
Shows remaining power in 4 levels. 
Play 
Play/Pause in Audio mode. Lit when plays, or blinks when paused. In 
Browser mode,  the icon is turned off. 
Stop 
In Audio Mode, Stops playing or hold for 3 sec to turn off. In Browser 
and Menu modes,  icon is lit. 
Fwd/Bwd 
In Audio Mode, icon blinks in Fast Forward or Fast Reverse;  
otherwise, it is not showed. 
Volume 
Indicates low and high sound in 6 levels. 
USB 
On when the Jukebox is connected to the computer via the USB 
cable. Note: Other functions are not available when USB cable is 
connected. 
AUDIO 
On when in Audio mode, and off otherwise. 
PARAM 
On when in Menu mode and off otherwise. 
 
 
MAC USB Driver and MusicMatch™ Software Installation 
 
Connecting Jukebox to MAC & Uploading MP3 Tracks  
 
MAC USB Driver Installation 
• 
Turn on your computer and wait until it has finished booting. 
• 
Gently connect one end of the USB cable to the Jukebox.  
• 
Turn on the Jukebox.  ARCHOS power adaptor may be required if there isn’t enough power 
from the batteries. 
• 
Connect the other end of the USB cable to a free USB port on your computer. 
• 
Insert the included software CD into your CDROM drive 
• 
Double click on the software CD shows on your computer desktop 
• 
Double click on the ARCHOS USB Driver Installer 
• 
Follow the on-screen instructions, then Restart your computer 
• 
You should recognize an additional hard disk icon displayed on the desktop 
• 
Drag and Drop MP3 tracks to Jukebox Drive 
• 
Disconnect the USB cable on both ends, and play the MP3 tracks  
 
Note :  
Your Mac system will recognize the Jukebox hard disk automatically if you have 
PC Exchange Installed.  If not, you will have to re-format the Jukebox hard disk 
for Mac to recognize.  To format, highlight the New Recognized Hard Disk and 
click on Erase Disk under “Special“ Mac Menu.  MAC disk utilities may be 
required to partition the hard disk in some cases.