Gateway 710x Mode D'Emploi
216
Chapter 11: Upgrading Your Computer
www.gateway.com
5
Slide the power supply up and away from the power supply brackets.
6
Install the new power supply into the case, then install the four retention
screws to secure the power supply to the case.
screws to secure the power supply to the case.
7
Reconnect the power supply cables using your notes from
. See the
power supply documentation for further instructions.
8
Close the case by following the instructions in
Replacing the system board
To replace the system board:
1
Remove the side panel by following the instructions in
2
For more stability, place your computer on its side. To avoid scratching
the case, place it on a towel or other non-abrasive surface.
the case, place it on a towel or other non-abrasive surface.
3
Remove all of the add-in cards by following the instructions in