Minox dc 4011 Mode D'Emploi
1
Warranty Policy
This camera is under warranty for one full year from the date of purchase by the original
purchaser. In case of defects in materials or workmanship, we will replace or repair the camera
free of charge. This warranty applies to the camera only. This warranty does not include
batteries, or other accessories which have not been manufactured by our company. This
warranty will not be honored if the camera has been mishandled or tampered with, or altered by
anyone other than the manufacturer. Other than for the warranty herein, we are not respon-
sible for loss, damage, or inconvenience of any kind. A defective camera being returned under
warranty must be accompanied by a brief description of the difficulties encountered and also by
a proof of purchase with the date of purchase clearly indicated. All related transportation costs
and insurances are at the owner’s expense. Any alteration of this warranty cannot be made
without the written approval from our company.
purchaser. In case of defects in materials or workmanship, we will replace or repair the camera
free of charge. This warranty applies to the camera only. This warranty does not include
batteries, or other accessories which have not been manufactured by our company. This
warranty will not be honored if the camera has been mishandled or tampered with, or altered by
anyone other than the manufacturer. Other than for the warranty herein, we are not respon-
sible for loss, damage, or inconvenience of any kind. A defective camera being returned under
warranty must be accompanied by a brief description of the difficulties encountered and also by
a proof of purchase with the date of purchase clearly indicated. All related transportation costs
and insurances are at the owner’s expense. Any alteration of this warranty cannot be made
without the written approval from our company.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in commercial installation. This equipment generates,
uses and can radiate radio frequency energy and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, detectable by turning the equipment
in question off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in commercial installation. This equipment generates,
uses and can radiate radio frequency energy and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, detectable by turning the equipment
in question off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna
Increase the distance between the equipment and the receiver
Connect the equipment to an outlet on a different circuit than that which the
receiver is connected to
Consult the dealer or an experienced radio/TV technician for help
Increase the distance between the equipment and the receiver
Connect the equipment to an outlet on a different circuit than that which the
receiver is connected to
Consult the dealer or an experienced radio/TV technician for help
NOTE
A shielded-type DC power cable incorporated with a ferrite core is required in order to meet the
FCC emission limits and also to prevent interference to the nearby radio and television reception.
Use only shielded I/O cable incorporated with a ferrite core to connect this equipment to host
computer and TV set. Shielded AC power cable and shielded I/O cables are required in order
to meet the FCC emission limits. It is essential that only the supplied power cord and I/O cable
(s) can be used.
FCC emission limits and also to prevent interference to the nearby radio and television reception.
Use only shielded I/O cable incorporated with a ferrite core to connect this equipment to host
computer and TV set. Shielded AC power cable and shielded I/O cables are required in order
to meet the FCC emission limits. It is essential that only the supplied power cord and I/O cable
(s) can be used.
85939-450-E.p65
2002/11/12, ¤U¤È 01:13
1