Cnet CWR-901 Mode D'Emploi
Ingress, Dest IP/Port: select the packet with an incoming destination IP.
Egress, Src IP/Port: select the packet with an outgoing source IP.
Ingress, Src IP/Port: select the packet with an incoming source IP.
-
Type: Define the packet type – TCP, UDP or IP
-
Port: Enter the port number.
-
Day: Select the Day – Sun, Mon, Tue, Wed, Thu, Fri or Sat.
-
Time: Define the Time range.
-
Enable: Check the box and enable this ACL group.
-
Apply: Save the parameters.
-
Reset: Click on “Reset” button to undo your changes.
-
Help: To request help information.
3.5.2 URL Filter
URL filter can identify URL strings inside any packet, with any TCP/UDP port number and filter
them. It provides eight entries and can filter packets by their source IP range.
them. It provides eight entries and can filter packets by their source IP range.
-
URL String pattern to be blocked: Enter the URL strings to be blocked.
-
Source IP range: Enter the Source IP range that you want to block the URL string.
-
Enable: Check the box and enable this URL condition.
-
Apply: Save the parameters.
-
Reset: Click on “Reset” button to undo your changes.
-
Help: To request help information.
3.5.3 ALG
Some applications embed their IP and port information in their payload which is not NAT friendly.
An Application Layer Gateway (ALG) is a plug-in module on NAT firewall to masquerade such
application layer payloads.
An Application Layer Gateway (ALG) is a plug-in module on NAT firewall to masquerade such
application layer payloads.
31