Cnet CWR-901 Mode D'Emploi

 

 

- 

Time Zone: Select the time zone of the country where the wireless router is 
located. 

- 

NTP server1: Default NTP server address (clock.stdtime.gov.tw). 

- 

NTP server2: Default NTP server address (time-b.nist.gov). 

- 

NTP server3: Default NTP server address (time.nist.gov). 

- 

Time: Display current time of the wireless router. 

- 

Save/Time Sync: Save the settings and update the time from selected servers. 

- 

Refresh Time: Update the time from selected servers. 

- 

Help: To request help information. 

 

The firmware on the wireless router can easily be updated. 
Firmware Update: Click on the Browse button to select the firmware and then click on the Update 
button. 
After the firmware upgrade is completed, the wireless router will restart. 
Note: Do not power off the wireless router while firmware is being upgraded. 
 

 

 

- 

Firmware Version: Current firmware version. 

- 

Firmware Update: Enter the location and name of the file containing the new 
firmware. Use the Browse button to browse for the file. 

- 

Update: Click on the button to update the wireless router’s firmware. 

- 

Help: To request help information. 

 

Users can connect to this wireless router from WAN side using the wireless router’s WAN IP. The 
wireless router’s current WAN IP is shown in the WAN status page. To avoid conflicting with virtual 
server at port 80, users can specify a different port number for “Remote Management Port” for 
WAN side access.   
 

 

50