Soundstream 102 Mode D'Emploi

0

HIGH POWER 

 HIGH CURRENT

CAUTION: DO NOT SWITCH

11.

Power 

 Indicates amplifier power, either in High Power or  Auto High

 Selectable high

pass filter frequency range. Select ‘SUB SONIC” to engage the Sub Sonic
filter at 13Hz with no boost. Select “Hawkins Bass Control” to engage the
Sub Sonic filter at 45 Hz with available boost. Select “H.P. XOVER” to engage
the amplifier’s high pass filter at 45Hz or 

 for running satellite speakers.

Low Pass 

 Selectable low pass filter for driving subwoofers

at 

Note: Do not have the 

“MONO” for bridged mono operation with a single

input signal (right channel only).

“SUM” for bridged mono operation sum-

ming two input signals (left and right). “ST” for normal stereo operation.

 Main power supply fuse. Warning: Replace only with the same

value fuse!

 

 Connected to a fuse or circuit breaker, then to the battery’s positive

terminal

GND   Main ground connection. Bolt to a clean chassis point in the vehicle.
REMOTE   Remote turn-on input from the head unit. Accepts 

 Speaker connections for Ch’s 1   2.

 Varies from 0 to 

 

 of

boost when the Hawkins Bass Control circuit is engaged.

 Independent Left and Right input level controls.

RCA Inputs   Right and Left channel RCA   inputs.

 

 Crossover frequency settings for amplifier.

 Use HIGH CURRENT for loads at 1

ohm stereo (2 ohms mono).
CAUTION: DO NOT SWITCH WHEN AMPLIFIER 

TURNED ON.