Standard Horizon cpn1010i Mode D'Emploi
Page 102
Owner’s Manual
NMEA-0183/NMEA-2000 Interfacing
To take advantage of these functions the CPN Series Chart Plotter must be interfaced
(wired) to a STANDARD HORIZON or compatible DSC VHF. Refer to Chapter 7 “Connections”
for connection example.
(wired) to a STANDARD HORIZON or compatible DSC VHF. Refer to Chapter 7 “Connections”
for connection example.
DSC data can be received both from NMEA-0183 and NMEA-2000 relevant instruments, without any
priority. In this mode the safety will be increased.
priority. In this mode the safety will be increased.
Distress Call
CPN Series Chart Plotters are able to display the location of a vessel in distress when
interfaced to a compatible DSC VHF with NMEA-0183 or NMEA-2000 output and the radio
receives a DSC Distress Call. CPN Series Chart Plotter also log DSC Distress Calls to
review at a later date. To select the Distress Call page follow the procedure:
1. Press the
interfaced to a compatible DSC VHF with NMEA-0183 or NMEA-2000 output and the radio
receives a DSC Distress Call. CPN Series Chart Plotter also log DSC Distress Calls to
review at a later date. To select the Distress Call page follow the procedure:
1. Press the
key, tap on User Points.
2. Turn the
rotary knob until DSC LOG is highlighted and tap on it.
This page allows to:
· tap on
: centers the map on the selected DSC position
· tap on
: deletes the selected DSC position
· tap on
: deletes all entries
· tap on
/
: allows hiding/showing the selected DSC position on the chart
· tap on
: allows selecting the Position Request page.
Position Request
CPN Series Chart Plotters are able to display the location of a vessel when connected DSC
VHF radio and when a Position Request or Report Call is received. CPN Series Chart Plotter
also logs DSC Distress Calls to review at a later date. To select the Position Request page
follow the procedure:
1. Press the
VHF radio and when a Position Request or Report Call is received. CPN Series Chart Plotter
also logs DSC Distress Calls to review at a later date. To select the Position Request page
follow the procedure:
1. Press the
key, tap on User Points.
2. Turn the
rotary knob until DSC LOG is highlighted and tap on it.
3. Tap on
.