Standard Horizon cpn1010i Mode D'Emploi
Page 64
Owner’s Manual
2.6.6
CREATING/MODIFYING A MARK IN USER POINTS LIST
This function is very useful if you have a list of Marks that you want to enter into the CPN Series Chart
Plotter.
Plotter.
1. Press the
key, tap on User Points.
2. Tap on MARKS. The Marks/Waypoints List page will be shown.
3. To create a New Mark, tap on
. A row is added (see A).
4. Tap on
. The Mark Icon appears selected (see B).
5. Press the
rotary knob
1
. The Mark Icons popup window appears.
1
It is possible to use the
ShuttlePoint knob in place of the
rotary knob. Make sure that the ShuttlePoint
Enter item (see Par. 2.1.4 “Settings in General Setup Menu”) is set to On, so pressing the
ShuttlePoint
knob in the center is equal to confirm action.
6. Tap on the desired Mark Icon (see C). The Mark Icons window disappears.
7. Turn the
7. Turn the
rotary knob to the right to select the Mark Name field and press the
Rotary
Knob. The touchscreen keyboard appears. Insert the desired name (see D); when
finishd tap on
finishd tap on
, the keyboard disappears.
8. Turn the
rotary knob to the right to select the Latitude/Longitude field and press the
rotary knob. Again the touchscreen keyboard appears. Insert the desired coorinates;
when finished tap on
, the keyboard disappears.
9. Turn the
rotary knob to the right to select the Mod field and press the
rotary knob.
10. You can choose among SHOW to show on the chart the name and icon of Mark, ICON
to show on the chart only the icon of Mark or HIDE to hide on th Chart page the created
Mark. Tap on the desired modeto show the Mark.
Mark. Tap on the desired modeto show the Mark.
11. Press the
key to save the created Mark.
12. Press the
key again and the new Mark appears on the Chart page (see E).
After entering in a Mark it is a god practice to backup the points to a SD CARD.