Suunto mosquito Mode D'Emploi
76
3. Press S to change the selection in the following
sequence.
sequence.
->altitude adjustment -> personal adjustment -> units
4. While the altitude digits are selected (blinking), press
+ or - to change the Altitude Mode (Fig. 4.16.).
+ or - to change the Altitude Mode (Fig. 4.16.).
5. While the personal adjustment digits are selected
(blinking), press + or - to change the Personal
Adjustment Mode (Fig. 4.15.).
(blinking), press + or - to change the Personal
Adjustment Mode (Fig. 4.15.).
6. While the units are blinking in the lower part of the
display, press + or - to change units (Fig. 4.16.).
display, press + or - to change units (Fig. 4.16.).
7. After you have set the desired adjustments, press
the M button to save the settings and to return to the
Setting Mode [SET] ).
the M button to save the settings and to return to the
Setting Mode [SET] ).
WARNING
Always recheck the personal and altitude
adjustment to ensure that the altitude is not set
for an altitude less than that of the dive site and
that the personal mode corresponds to the desired
conservatism. Failure to enter this information
could result in dive planning errors and risk
exposure to decompression sickness.
adjustment to ensure that the altitude is not set
for an altitude less than that of the dive site and
that the personal mode corresponds to the desired
conservatism. Failure to enter this information
could result in dive planning errors and risk
exposure to decompression sickness.
Fig. 4.15. Setting Personal
Adjustment.
Adjustment.
Fig. 4.16. Setting metric/
imperial units.
imperial units.