Suunto mosquito Mode D'Emploi
86
To enter the Data Transfer Mode:
1. In the Memory Mode [MEM], press S three (3)
times to select the Data Transfer Mode The TR-PC
text appears at the bottom of the display to indicate
the selected mode (Fig. 5.11.).
times to select the Data Transfer Mode The TR-PC
text appears at the bottom of the display to indicate
the selected mode (Fig. 5.11.).
2. Wait two seconds until the Data Transfer Mode
activates automatically.
activates automatically.
NOTE: While in the Data Transfer Mode, the water
contact is used only for the data transfer, and when
connecting the contact by submerging it, the Dive
Mode IS NOT automatically activated. Data transfer
stops also the stopwatch.
contact is used only for the data transfer, and when
connecting the contact by submerging it, the Dive
Mode IS NOT automatically activated. Data transfer
stops also the stopwatch.
After you have fi nished the data transfer, Press the
M to exit Data Transfer Mode [TR-PC] and enter the
Memory Mode [MEM]. If no button is operated or
no data is transferred within 5 minutes, the Mosquito
beeps and returns to the timekeeping display
automatically.
M to exit Data Transfer Mode [TR-PC] and enter the
Memory Mode [MEM]. If no button is operated or
no data is transferred within 5 minutes, the Mosquito
beeps and returns to the timekeeping display
automatically.
Using the PC software, you are able to enter setup
options such as:
options such as:
•
input a personal, 30 character fi eld into the
Mosquito (i.e. your name)
Mosquito (i.e. your name)
•
reset the Dive History’s max depth to zero.
Fig. 5.11. Data Transfer and
PC-Interface
PC-Interface