Suunto mosquito Mode D'Emploi
91
BATTERY REPLACEMENT
The battery is located in a separate battery com-
partment on the back side of the instrument (Fig. 6.1.).
To change the battery, follow the procedure below:
partment on the back side of the instrument (Fig. 6.1.).
To change the battery, follow the procedure below:
1. Thoroughly rinse and dry the computer.
2. Open the battery compartment lid by carefully but
fi rmly turning it counterclockwise using a coin or a
screwdriver. When turned the lid should rise from the
compartment. Care should be taken not to damage
any of the parts. Use a large enough coin/screwdriver
in order not to damage the lid.
fi rmly turning it counterclockwise using a coin or a
screwdriver. When turned the lid should rise from the
compartment. Care should be taken not to damage
any of the parts. Use a large enough coin/screwdriver
in order not to damage the lid.
3. Remove the battery compartment lid with your
fi ngers . Do not use sharp metal objects as they might
damage the O-ring or the sealing surfaces.
fi ngers . Do not use sharp metal objects as they might
damage the O-ring or the sealing surfaces.
4. Carefully remove the battery from underneath the
battery retainer/contact. The battery can be removed
by inserting a screwdriver under the battery and
moving the battery with your fi nger. Be careful not to
damage the electrical contacts or the sealing surface.
battery retainer/contact. The battery can be removed
by inserting a screwdriver under the battery and
moving the battery with your fi nger. Be careful not to
damage the electrical contacts or the sealing surface.
Check for any traces of fl ooding or other damage.
In case of a leak or any other damage, bring the
dive computer to an authorized SUUNTO dealer or
distributor for check and repair.
In case of a leak or any other damage, bring the
dive computer to an authorized SUUNTO dealer or
distributor for check and repair.
Fig. 6.1.Battery Compartment
Lid
Lid