jWIN jd-c5015 Mode D'Emploi
27
Note:
After an image is taken using self-timer, the self-timer mode is turned off.
The self-timer is not possible in the continuous capture mode.
The self-timer is only available for 2 or 10 seconds delay at [
The self-timer is not possible in the continuous capture mode.
The self-timer is only available for 2 or 10 seconds delay at [
] mode. The
camera automatically starts to recording after 2 or 10 seconds.
Using the Flash
The flash is designed to function automatically when lighting conditions warrant the
use of flash. You can take an image using a suitable flash mode to your circumstances.
If you change the flash mode, the camera will retain that setting even if the camera is
turned off.
use of flash. You can take an image using a suitable flash mode to your circumstances.
If you change the flash mode, the camera will retain that setting even if the camera is
turned off.
1. Set the mode dial to one of [
], [
P
], [
Tv
], [
Av
], [
M
]
and power on the camera.
2. Press the [ ] button repeatedly until your desired
flash mode appears.
When you toggle the flash button at [
] mode,
the available flash modes are displayed in the
following order.
following order.
3. Compose the picture and press the shutter button down halfway, then press it
down fully.
Note:
After flash fires, it takes approximately 5 seconds to 10 seconds to be ready for the next
shot during solid orange indicator.
shot during solid orange indicator.
[ No display ] Auto
[
]Red-Eye Forced Flash
[ ]Suppressed Flash
[ ]Forced Flash