KYOCERA km-c2520 Mode D'Emploi

Printer Settings

3-35

Press [S] or [T] to select the user and 
press [Next]. 

Press [S] or [T] to select the job and 
press [Next]. 

NOTE: Select the job and press 
[Delete] to delete the selected job. 

Press [+], [–] or numeric keys to set the desired number of copies and press [Printing]. 

Processing message is displayed and printing begins.

When printing is complete, the screen returns to printer mode. 

By setting Proof and Hold in the printer driver and specifying the required number of copies, this 
device prints a single copy and saves the document data to the hard disk or RAM disk. Use the 
operation panel to print the remaining copies. The number of copies can be changed at this time. 
When the power is switched off, jobs saved in this mode are erased. 

The printing operation is the same as Quick Copy. For Quick Copy printing procedures, refer to 
Quick Copy on page 3-34. 

Private Print is feature to print from the operation panel by entering the same 4 digit code as entered 
in the print driver when starting printing. Data is erased after printing is complete. 

Job Storage saves the print data to the hard disk. The data remains on the hard disk to be printed 
any number of times, even after printing is complete or the power is switched off. The feature can be 
used with or without an access code. For either driver setting method, refer to the Kyocera 
Extended Driver User Guide. 

Press the Printer key. 

Press [e-MPS]. 

Press [Private/Stored]. 

name.

Cancel

Next

Up

User

Down

Cancel

Next

Up

Job

Down

Delete

e-MPS

Quick Copy

Private/

Print VMB

List of

Configu-

Select item.

List of

ration

VMB

Stored

Code JOB

Data Tray