KYOCERA km-c2520 Mode D'Emploi

Troubleshooting

9-11

If the Printer mode touch panel displays any of these messages after pressing the Printer key, 
follow the corresponding procedure.

Is it re-displayed after opening and 
closing the front cover, turning off 
and on the main power switch, and 
plugging out and plugging in the 
power plug in the power outlet?

A hard disk error has occurred. 
Contact your Service Representative 
or Authorized Service Center.

—

(Please wait.
Remote editing.)

Is Job account editing being done 
from a network connected 
computer? 

Copying is not possible until editing 
is complete. 

—

Is it re-displayed after opening and 
closing the front cover, turning off 
and on the main power switch, and 
plugging out and plugging in the 
power plug in the power outlet?

Contact your Service Representative 
or Authorized Service Center.

—

Does the print data match the feed 
paper size and paper type? 

Replace the size or type of source 
paper. 

To change the paper source, select 
paper source from the touch panel 
and press [GO]. 

To print on the loaded paper, press 
the Printer key and press [GO].

To cancel printing, press the Printer 
key and press [Cancel].

Refer to 
Operation 
Guide, 
Chapter 2

—

Displayed when paper source is 
changed. Press [GO]. 

—

—

This mode supplies paper one sheet 
at a time even if multiple sheets 
have been loaded. To feed each 
sheet, press [GO]. 

—

Is the paper source empty? 

Load more paper.

Refer to 
Operation 
Guide, 
Chapter 2

(Stapler empty.
Add staples.)

Is the optional document finisher or 
3000 sheet document finisher out of 
staples? 

Refer to the optional document 
finisher or 3000 sheet document 
finisher Operation Guide to refill 
staples.

—

—

An internal error has occurred. 
Contact your Service Representative 
or Authorized Service Center. 

—

—

No matching ID-code found. Verify 
the registered ID-code using the 
driver. 

—