KYOCERA km-c2520 Mode D'Emploi

Copy Functions

1-62

This section explains the copying functions available when using Job Build. 

Select the paper size.

Press [Basic]. On the next screen, press 
[Select Paper]. 

Select the MP tray or a cassette and press [Close].

Select the original type according to type of original being scanned. The following original types are 
available. 

Press [Basic]. On the next screen, press [Original Type]. 

Select [1 sided] ([1-sided]), [2 sided] ([2-sided]) or [Book]. 

When selecting [2 sided], check the binding direction and be sure that the originals are placed in the 
correct orientation. 

When selecting [Book], be sure that the binding direction is correct.

NOTE: [2 sided] ([2-sided]) is displayed when the optional document processor is installed. 

Press [Close]. 

Select either [1 sided Copy] ([1-sided Copy]) or [2 sided Copy] ([2-sided Copy]) for the finish type. 

Press [Basic]. On the next screen, press [1 sided/2 sided] ([1-sided/2-sided]). 

NOTE: 1 sided/2 sided copy selection is common to all steps. It may only be configured as the first 
step. 

Press [1 sided Copy] ([1-sided Copy]) or [2 sided Copy] ([2-sided Copy]) and from Finished select 
the binding direction. 

Place originals then press Start key.

Job Build

Ready to Job build.

Select

1 sided

Original

Basic

Quality

Reduce

Top Edge

Finished

1 sided/

2 sided

Orig. Set

Direction

1 sided Copy

Edit

1 sided copy-Left

Finished page #:

Step

Auto %

-

Paper

Type

/Enlarge

Offset

(                  )

Full-Color

11×8½"

1 sided (1-sided)

Single sided sheet original. 

2 sided (2-sided)

2-sided sheet original. 

Book

Magazine or book originals with facing pages.