LG 15FC2RB Manuel Du Propriétaire

2

1.  Connect the RF out socket of the VCR to the

aerial socket on the back of the set.

2.  Connect the aerial cable to the RF aerial in

socket of the VCR.

3. Store the VCR channel on the programme

number 0 using the ‘Manual programme tun-

ing’ section.

4.  Select the programme number where the

VCR channel is stored.

5. Press the PLAY button on the VCR.

1.  Connect the audio/video out sockets of the

VCR to audio/video in sockets of the set.

2.  If the VCR is connected to the AV sockets on

the set, press the TV/AV button to select 

(or 

)

, 

or 

.

3. Press 

the 

PLAY button on the VCR.

You can also record programmes received by

the TV on video tape via audio/video out

sockets.

1.  Connect the Euro scart socket of the VCR to

the Euro scart socket of the set.

2. Press 

the 

PLAY button on the VCR.

If your VCR outputs a switching voltage when

connected to Euro scart socket, the set will

switch to 

(or 

)

mode automatically. But

if you want to keep on watching TV mode,

press the 

D

D 

 

E

E 

 

or NUMBER buttons.

Otherwise press the TV/AV button on the

remote control handset to select 

(or 

)

. 

You can also record programmes received by

the TV on video tape.

1.  Connect the COMPONENT video output

sockets (Y Cb Cr, Y Pb Pr or Y B-Y R-Y) of the
DVD player to the COMPONENT INPUT sock-
ets (Y P

B

P

R

) on the set.

2. Connect the audio cable from the DVD player

to AUDIO IN sockets of 

AV (or AV1)

.

3. Press the TV/AV button to select 

.

4. Press 

the 

PLAY button on the DVD player.

The COMPONENT playback picture appears

on the screen.

When connecting the S-video socket of the VCR

to the S-VIDEO socket of the set, the picture qual-

ity will be further improved.

1. Connect the S-video socket of the VCR to the

S-VIDEO socket of the set.

2. Connect the audio cable from the VCR to the

AUDIO sockets of the set.

3. Select 

by pressing the TV/AV button

repeatedly.

4. Press 

the 

PLAY button on the VCR.

The VCR playback picture appears on the

screen.

You can listen to the sound through the head-

phones. To adjust the headphone volume, press
the 

F

G 

button.

If you press the MUTE button, the sound from the

headphone’s is switched off.

This set operates on an AC mains supply, the volt-

age is as indicated on the label on the back cover.

Never apply DC power to the set. In the event of

thunderstorms or powercuts, please pull out the

aerial and mains plugs.

Press the POWER button on the front panel or side panel

to turn off the TV when the TV set is not being used for a

long time.It is recommended to remove the plug from the

wall outlet(Power point).

Mains plug is the disconnecting device. The plug

must remain readily operable

To prevent fire or shock hazard, do not expose the set

to rain or moisture.Do not place anything containing liq-

uid on top of the set, this may cause a fire or could give

an electric shock.

Never remove the back cover of the set as this can

expose you to very high voltage and other hazards. If

the set does not operate properly, unplug it and call

your dealer.

Connect the aerial cable to the socket on the back

cover. For the best reception an outdoor aerial

should be used.

Position your set so that no bright light or sunlight

falls directly onto the screen. Care should be

taken not to expose the set to any unnecessary

vibration, moisture, dust or heat. Also ensure that

the set is placed in a position to allow a free flow

of air. Do not cover the ventilation openings on the

back cover.