Avocent PM 20 ATP2035-001 Fiche De Données

Inputs

Avocent PM PDUs enable remote power control and system management of IT assets in
branch and remote offices. When used in conjunction with Avocent ACS advanced console
servers, MergePoint Unity® KVM over IP and serial console switches or DSR® KVM over IP
switch appliances, the Avocent PM PDUs offer quick problem resolution through an integrat-
ed management interface. With one or more outlets positively associated with a particular
device, users may control power “in line” through a user-defined “hot key” or by using an
intuitive Web browser-based graphical user interface (GUI). In addition, a special command
set facilitates scripting.

Avocent NEMA PM PDU models are equipped with 5-15R power outlets and fixed power
cables. These units are available in 15A, 20A and 30A capacities with optional twist-lock input
plugs. Each model includes two RS-232 ports: one for management and the second for daisy-
chain expansion. Daisy chaining allows an operator to control up to 128 power outlets as a
single device. The NEMA models are designed to operate in 100-125 VAC environments.

Avocent IEC PM PDU models are equipped with IEC320-C13 power outlets and either
IEC320 modular inlets or fixed power cables. These units are available in 10A, 15A, 16A,
20A, 30A and 32A capacities. Each model includes two RS-232 ports: one for management
and the second for daisy-chain expansion. Daisy chaining allows an operator to control up to
128 power outlets as a single device. The IEC models are designed to operate in 100-240
VAC environments.

An LED display shows the real-time, true RMS current draw. Each PM PDU may be config-
ured to sound an alarm during an overcurrent condition, and if it is connected to an Avocent
ACS console server, the PDU may also send notifications via e-mail messages, Short
Message Service (SMS) pager messages and SNMP traps.

•  Power control over remote IT assets from

anywhere on earth

•  Seamless integration with other Avocent

appliances and with the DSView® 3
management software

•  Proactive fault management and isolation

•  Fault notifications via e-mail, SMS page

and SNMP traps

•  Restore practically any IT asset without

dispatching service personnel

•  Virtually eliminate power control errors

during crisis situations

•  Improve administrative efficiency with

integrated control functions

•  Proactively identify and manage problems

to improve mean time between failure
(MTBF)

•  Reduce risk, reduce mean time to repair

(MTTR)

•  Conserve valuable IP addresses and

switch ports