Juniper JX-CBL-RS232-DTE Fiche De Données
DATASHEET
1
Product Description
The Juniper Networks
®
Single-port Serial Mini-PIM for the SSG20 Secure Services
Gateway complements the five on-board 10/100 Ethernet interfaces with expanded
WAN connectivity. It offers up to 8 Mbps performance with support for a variety of serial
network media types, including X.21, V.35, RS-232, RS-449/RS-422, and EIA530/EIA530A.
The Single-port Serial Mini-PIM is equipped with a dedicated network processor that
forwards traffic to the SSG20 CPU where traffic decisions are made based upon security
policies. This allows the SSG20 to be deployed as a security appliance or as a secure
router where serial connectivity is required.
WAN connectivity. It offers up to 8 Mbps performance with support for a variety of serial
network media types, including X.21, V.35, RS-232, RS-449/RS-422, and EIA530/EIA530A.
The Single-port Serial Mini-PIM is equipped with a dedicated network processor that
forwards traffic to the SSG20 CPU where traffic decisions are made based upon security
policies. This allows the SSG20 to be deployed as a security appliance or as a secure
router where serial connectivity is required.
Features and Benefits
The Juniper Networks Single-port Serial Mini-PIM provides the following features and
benefits:
benefits:
Table 1: Single-Port Serial Mini-PIM Features and Benefits
FEATURE
FEATURE DESCRIPTION
BENEFIT
Support for
multiple serial
media types
multiple serial
media types
Multiple serial interface
types supported via a DB-60
connector, including:
• X.21 • V.35
• RS-232
types supported via a DB-60
connector, including:
• X.21 • V.35
• RS-232
• RS-449/RS-422
• EIA530/EIA530A
Allows the SSG20 to be deployed
in a variety of serial environments
without significant upgrades or
changes to hardware
in a variety of serial environments
without significant upgrades or
changes to hardware
Predictable high
performance
performance
Maximum synchronous speed
of 8.0 Mbps.
of 8.0 Mbps.
Provides line rate performance
while running services such as
stateful firewall and IPsec
while running services such as
stateful firewall and IPsec
Configurable clock
rate and clock
modes
rate and clock
modes
Interfaces can be configured with a
variety of clock rates between 1.2 KHz
and 8 MHz.
variety of clock rates between 1.2 KHz
and 8 MHz.
Interfaces can be configured with data
terminal equipment (DTE), internal, and
loop clock modes.
terminal equipment (DTE), internal, and
loop clock modes.
Provides flexibility in
synchronizing DCE and DTE
devices, allowing for performance
optimization based on individual
network requirements
synchronizing DCE and DTE
devices, allowing for performance
optimization based on individual
network requirements
Encryption
resynchronization
resynchronization
In the event of a line error or outage,
the Single-port Serial Mini-PIM
automatically instructs the SSG20 to
send resynchronization signals until
resynchronization is achieved.
the Single-port Serial Mini-PIM
automatically instructs the SSG20 to
send resynchronization signals until
resynchronization is achieved.
Reduces downtime and overhead
due to network outages
due to network outages
Product Overview
The Juniper Networks Single-port Serial
Mini-PIM for the Juniper Networks
SSG20 Secure Services Gateway,
provides physical connectivity to a
variety of serial network media types to
increase flexibility and operational ease.
Mini-PIM for the Juniper Networks
SSG20 Secure Services Gateway,
provides physical connectivity to a
variety of serial network media types to
increase flexibility and operational ease.
SINGLE-PORT SERIAL
MINI-PHYSICAL
INTERFACE MODULE
MINI-PHYSICAL
INTERFACE MODULE