LG P920 LG Optimus 3D Manuel Du Propriétaire
25
Important notice
8. Connecting your phone to a
computer via USB
To transfer files in your microSD card using USB
devices:
Install your microSD card on your phone. (It may
already be inserted in your phone.)
Before connecting the USB data cable, make sure
Before connecting the USB data cable, make sure
the
Mass storage mode is enabled on your phone.
(On the
Applications tab, choose Settings > SD
card & phone storage > Mass storage only)
Use the USB cable with your phone to connect it to
Use the USB cable with your phone to connect it to
a USB port on your computer. Touch
Turn on USB
storage. You will get a notification that the USB is
connected.
1
2
3
When the phone is connected as USB storage, you
will receive a notification. You phone’s microSD card is
installed as a drive on your computer. You can now copy
files to and from the microSD card.
NOTE:
NOTE:
When uninstalling PC Suite IV, USB and Bluetooth
Drivers are not automatically removed. They must
therefore be removed manually.
TIP!
TIP!
To use the microSD card on your phone again, you
need to open the notification drawer and touch Turn
off USB storage.
off USB storage.
During this time, you can’t access
the microSD card from your phone, so you can’t use
applications that rely on the microSD card such as
camera, gallery and music functions.To disconnect your
phone from the computer, carefully follow the computer
’s instructions about how to disconnecting USB devices,
to avoid losing information on the card.
Safely disconnect the USB device from your
computer.
Open the notification drawer and touch
Open the notification drawer and touch
Turn off USB
storage.
Touch
Touch
Turn off in the dialogue box that opens.
1
2
3
WARNING
Do not insert or remove the microSD card when the
phone is on. This might damage the microSD card
as well as your phone, and the data stored on the
microSD card could be corrupted. To remove the
microSD card safely, from the Home screen press
the
Menu key and touch Settings > SD card &
phone storage > Unmount SD card.