SATO MB400i WWMB51081 Fascicule

General 

Specifications

SATO America, Inc.

10350-A Nations Ford Road, Charlotte, NC 28273
Phone: (704) 644-1650 Fax: (704) 644-1662
E-mail: satosales@satoamerica.com

© 2009 SATO America, Inc. All rights reserved. Rev. 01/09b

Direct Thermal

203 dpi (8 dpmm)

203 dpi (8 dpmm)

305 dpi (12 dpmm)

Up to 4"/s (103 mm/s) at 16% printing coverage - Default Print Speed is 3"/s (75 mm/s)

1.89" (48 mm) W x 6.3" (160 mm) L

4.09" (104 mm) W x 11.69" (297 mm) L

Reflective Sensor (for use with pre-printed marks) - See-Through Sensor (for die-cut label with gap)

Dispenser Sensor

Roll Die-Cut Label with Gap or Pre-Printed Label, Linerless Media, Continuous Receipt Paper

Width

1.1" - 2.2" (28 mm - 57.5 mm)

2" - 4.49" (53 mm - 114 mm)

Length

0.63" - 6.4" (16 mm - 163 mm)

1.1" - 11.8" (28 mm - 300 mm)

Thickness

0.003" - 0.007" (0.064 mm - 0.19 mm)

Roll Specs

Outer Diameter : 2.63" (67 mm) - Inner Diameter: 0.75" (19 mm) or 1" (25 mm) for standard labels, 0.4" (10 mm) 

coreless for receipt paper or 0.75" (19 mm) for linerless paper

XU, XS, XM, XB, XL, OCR-A, OCR-

B, CG Times and Triumvirate

XU, XS, XM, XB, XL, OCR-A, OCR-B, CG Times and Triumvirate

Linear

UPC-A/E, UCC/EAN-128, Interleaved 2 of 5, CODE 39, CODE 128, EAN-8/13,  

CODE 93, RSS-14, POSTNET, NW-7

2-D

Data Matrix, PDF417, Maxicode, Composite Symbology, QR Code

RS232C, Bluetooth, IrDA (Ver.1.2, Standard Protocol, IrCOMM (3-wire cooked)), 

802.11b/g Wireless LAN (Supports WEP 64/128bit, WPA, WPA (PSK, 802.1x), and EAP)

USB

7.4 V (2400mAH) Lithium Ion

14.8V (1700mAH) Lithium Ion

Operating

5º F – 122º F (-15º C – 50º C), 20%-80% RH, non-condensing

32º F – 122º F (0º C – 50º C), 20%-80% RH, non-condensing for 802.11g/b

Storage

-13º F – 140º F (-25º C – 60º C), 20%-80% RH, non-condensing

FCC Class A, B, C, UL, CE, TÜV, CSA

(w/ rubber boot)

3.5" (88 mm) L x 5.03" (128 mm) W 

x 2.9" (73 mm) H

3.9" (99 mm) L x 8" (202 mm) W x 6.5" (165 mm) H

w/ rubber boot)

0.9 lbs. (405 g) incl. battery pack

2 lbs. (910 g) incl. battery pack

6 ft. (1.83 m) - flat sides of printer to 

concrete

5 ft. (1.5 m) - flat sides of printer to concrete

Battery Charger (Single and Multi-Battery Capabilities), Spare Battery, AC Adapter, Serial to PC Cable, 

Optional Swivel Belt, Weather-

Resistant Carrying Case 

, Holster 

, 

Optional Shoulder Strap

Shoulder Bag with Rain-Resistant cover 

 ,  

Shoulder Strap and Belt Bag 

 

Auto Power Save. Printer enters sleep mode when idle for 5 seconds.  

Printer will power off automatically when idle for another 5 minutes. (Programmable power off feature)

Head Check, Battery Balance Check, Paper End, Head Open, Test Print, Over charge/discharge protection

includes backing liner    

 Non-booted Models