Viewsonic PJD5150 Manuel D’Utilisation

15

Examine your Video source device to determine if it has a set of unused composite 
Video output sockets available:

• If so, you can continue with this procedure.

• If not, you will need to reassess which method you can use to connect to the device.

To connect the projector to a composite Video source device:
1. Take a Video cable and connect one end to the composite Video output socket of 

the Video source device.

2. Connect the other end of the Video cable to the VIDEO socket on the projector.

Examine your Video source device to determine if it has a set of unused Component 
Video output sockets available:

• If so, you can continue with this procedure.

• If not, you will need to reassess which method you can use to connect to the device.

To connect the projector to a Component Video source device:
1. Take a VGA (D-Sub) to HDTV (RCA) cable and connect the end with 3 RCA type 

connectors to the Component Video output sockets of the Video source device. 
Match the color of the plugs to the color of the sockets; green to green, blue to 
blue, and red to red.

2. Connect the other end of the cable (with a D-Sub type connector) to the COM-

PUTER socket on the projector.