Viewsonic PJD6552LW Manuel D’Utilisation
34
Go to the PICTURE > Color Temp. menu and press
/ .
The options available for color temperature* settings vary according to the signal type
selected.
1.
Cool: With the highest color temperature, Cool makes the image appear the most
bluish white than other settings.
bluish white than other settings.
2.
Neutral: Makes images appear bluish white.
3.
Normal: Maintains normal colorings for white.
4.
Warm: Makes images appear reddish white.
*About color temperatures:
There are many different shades that are considered to be "white" for various purposes. One
There are many different shades that are considered to be "white" for various purposes. One
of the common methods of representing white color is known as the “color temperature”. A
white color with a low color temperature appears to be reddish white. A white color with a
high color temperature appears to have more blue in it.
Setting a preferred color temperature
1.
Go to the PICTURE > Color Temp. menu.
2.
Press
/ to select Cool, Neutral, Normal or Warm and press Enter.
3.
Press
/
to highlight the item you want to change and adjust the values by
pressing
/
.
•
Red Gain/Green Gain/Blue Gain: Adjusts the contrast levels of Red, Green,
and Blue.
and Blue.
•
Red Offset/Green Offset/Blue Offset: Adjusts the brightness levels of Red,
Green, and Blue.
Green, and Blue.
This function is only available when a PC input signal is selected.
Color Management
Only in permanent installations with controlled lighting levels such as boardrooms, lecture
theaters, or home theaters, should color management be considered. Color management
provides fine color control adjustment to allow for more accurate color reproduction, should
you require it.
If you have purchased a test disc which contains various color test patterns and can be used
to test the color presentation on monitors, TVs, projectors, etc., you can project any image
from the disc on the screen and enter the Color Management menu to make adjustments.
To adjust the settings:
1.
1.
Open the OSD menu and go to the PICTURE > Advanced > Color Management
menu.
menu.
2.
Press Enter and the Color Management page is displayed.
3.
Highlight Primary Color and press
/ to select a color from among Red, Yellow,
Green, Cyan, Blue, or Magenta.
4.
Press
to highlight Hue and press
/ to select its range. Increase in the range
will include colors consisted of more proportions of its two adjacent colors.