Sony SDM-V72W Manuel

Turn off the display and computer before connecting. Do not touch the pins of the video signal cable connector as this might bend the pins.

Remove the back panel by holding top 
with one hand as in the illustration then 
snap out the buttons located at each 
corner.

Remove the cable cover by lightly pulling 
top concave portion.

■

Connecting to an IBM PC/AT or compatible 
computer

Using the HD15/D-sub cable (supplied), 
connect the computer to the display’s HD15 
input connector.

Be sure to check the alignment of the HD15/
D-sub cable. Do not force the connector in 
the wrong way or the pins might bend.

■

Connecting a Macintosh

When connecting a Macintosh computer, 
use an adapter (not supplied) if necessary. 
Connect the adapter to the computer before 
connecting the video signal cable.