Sony SDM-V72W Manuel

Using the display’s speakers or headphones, you 
can listen to sound from your computer or other 
audio equipment connected to the display’s 
audio input jacks.

You can control the volume by using + /- buttons 
located at the right side of the display or on the 
remote card. When either button is pressed 
volume status will appear on your display screen. 

Press the +/- buttons to display volume 
status. 

Press the +/- buttons to control the 
volume.

The volume status will automatically disappear 
after about 3 seconds.

Use the MUTE button to mute the sound. Press 
MUTE again or + Volume button on the remote 
card to restore the sound.

By connecting your headphones to the display’s 
headphone jack, you can listen to sound from 
your computer or other audio equipment 
connected to the display’s audio input jacks. 

Be sure to remove the headphones before 
moving away from the display. If the headphone 
cord is pulled away from the display abruptly, 
injury or damage may occur.

POWER

DK

WIDE

MENU

INPUT

z

While displaying the main menu on 

the screen, use the +/- Volume buttons on 
the remote card to adjust the volume. The 
+/- Volume buttons on the side of the 
display become selection buttons when the 
main menu is displayed.

When your display is in power save mode (in 
PC mode), no sound comes from the 
speakers or the headphones.

✍